Renamed immediate constants

README.md

@@ -43,4 +43,5 @@ The following people have contributed to the design of RandomX:
 RandomX uses some source code from the following 3rd party repositories:
 * Argon2d, Blake2b hashing functions: https://github.com/P-H-C/phc-winner-argon2
 * PCG32 random number generator: https://github.com/imneme/pcg-c-basic
-* Software AES implementation https://github.com/fireice-uk/xmr-stak
+* Software AES implementation https://github.com/fireice-uk/xmr-stak
+* t1ha2 hashing function: https://github.com/leo-yuriev/t1ha

doc/isa.md

@@ -1,10 +1,11 @@
 
+
 ## RandomX instruction set
 RandomX uses a simple low-level language (instruction set), which was designed so that any random bitstring forms a valid program.
 
 Each RandomX instruction has a length of 128 bits. The encoding is following:
 
-![Imgur](https://i.imgur.com/thpvVHN.png)
+![Imgur](https://i.imgur.com/mbndESz.png)
 
 *All flags are aligned to an 8-bit boundary for easier decoding.*
 
@@ -33,10 +34,10 @@ The first operand is read from memory. The location is determined by the `loc(a)
 
 Flag `reg(a)` encodes an integer register `r0`-`r7`.  The read address is calculated as:
 ```
-reg(a) = reg(a) XOR signExtend(addr0)
-addr(a) = reg(a)[W-1:0]
+reg(a) = reg(a) XOR signExtend(addr(a))
+read_addr = reg(a)[W-1:0]
 ```
-`W` is the address width from the above table. For reading from the scratchpad, `addr(a)` is multiplied by 8 for 8-byte aligned access.
+`W` is the address width from the above table. For reading from the scratchpad, `read_addr` is multiplied by 8 for 8-byte aligned access.
 
 #### Operand B
 The second operand is loaded either from a register or from an immediate value encoded within the instruction. The `reg(b)` flag encodes an integer register (ALU operations) or a floating point register (FPU operations).
@@ -49,12 +50,12 @@ The second operand is loaded either from a register or from an immediate value e
 |011|register `reg(b)`|
 |100|register `reg(b)`|
 |101|register `reg(b)`|
-|110|`imm0` or `imm1`|
-|111|`imm0` or `imm1`|
+|110|`imm8` or `imm32`|
+|111|`imm8` or `imm32`|
 
-`imm0` is an 8-bit immediate value, which is used for shift and rotate ALU operations.
+`imm8` is an 8-bit immediate value, which is used for shift and rotate ALU operations.
 
-`imm1` is a 32-bit immediate value which is used for most operations. For operands larger than 32 bits, the value is sign-extended. For FPU instructions, the value is considered a signed 32-bit integer and then converted to a double precision floating point format.
+`imm32` is a 32-bit immediate value which is used for most operations. For operands larger than 32 bits, the value is sign-extended. For FPU instructions, the value is considered a signed 32-bit integer and then converted to a double precision floating point format.
 
 #### Operand C
 The third operand is the location where the result is stored.
@@ -72,18 +73,18 @@ The third operand is the location where the result is stored.
 
 The `reg(c)` flag encodes an integer register (ALU operations) or a floating point register (FPU operations).  For writing to the scratchpad, an integer register is always used and the write address is calculated as:
 ```
-addr(c) = 8 * (addr1 XOR reg(c)[31:0])[W-1:0]
+write_addr = 8 * (addr(c) XOR reg(c)[31:0])[W-1:0]
 ```
 *CPUs are typically designed for a 2:1 load:store ratio, so each VM instruction performs on average 1 memory read and 0.5 write to memory.*
 
-#### imm0
+#### imm8
 An 8-bit immediate value that is used as the shift/rotate count by some ALU instructions and as the jump offset of the CALL instruction.
 
-#### addr0
+#### addr(a)
 A 32-bit address mask that is used to calculate the read address for the A operand. It's sign-extended to 64 bits.
 
-#### addr1
-A 32-bit address mask that is used to calculate the write address for the C operand. `addr1` is equal to `imm1`.
+#### addr\(c\)
+A 32-bit address mask that is used to calculate the write address for the C operand. `addr(c)` is equal to `imm32`.
 
 ### ALU instructions
 
@@ -124,7 +125,7 @@ For the division instructions, the dividend is 64 bits long and the divisor 32 b
 *Division by zero can be handled without branching by a conditional move. Signed overflow happens only for the signed variant when the minimum negative value is divided by -1. This rare case must be handled in x86 (ARM produces the "correct" result).*
 
 ##### Shift and rotate
-The shift/rotate instructions use just the bottom 6 bits of the `B` operand (`imm0` is used as the immediate value). All treat `A` as unsigned except SAR_64, which performs an arithmetic right shift by copying the sign bit.
+The shift/rotate instructions use just the bottom 6 bits of the `B` operand (`imm8` is used as the immediate value). All treat `A` as unsigned except SAR_64, which performs an arithmetic right shift by copying the sign bit.
 
 ### FPU instructions
 
@@ -169,10 +170,10 @@ The following 2 control flow instructions are supported:
 |17|CALL|near procedure call|
 |15|RET|return from procedure|
 
-Both instructions are conditional in 75% of cases. The jump is taken only if `B <= imm1`. For the 25% of cases when `B` is equal to `imm1`, the jump is unconditional. In case the branch is not taken, both instructions become "arithmetic no-op" `C = A`.
+Both instructions are conditional in 75% of cases. The jump is taken only if `B <= imm32`. For the 25% of cases when `B` is equal to `imm32`, the jump is unconditional. In case the branch is not taken, both instructions become "arithmetic no-op" `C = A`.
 
 ##### CALL
-Taken CALL instruction pushes the values `A` and `pc` (program counter) onto the stack and then performs a forward jump relative to the value of `pc`. The forward offset is equal to `16 * (imm0[6:0] + 1)`. Maximum jump distance is therefore 128 instructions forward (this means that at least 4 correctly spaced CALL instructions are needed to form a loop in the program).
+Taken CALL instruction pushes the values `A` and `pc` (program counter) onto the stack and then performs a forward jump relative to the value of `pc`. The forward offset is equal to `16 * (imm8[6:0] + 1)`. Maximum jump distance is therefore 128 instructions forward (this means that at least 4 correctly spaced CALL instructions are needed to form a loop in the program).
 
 ##### RET
 The RET instruction behaves like "not taken" when the stack is empty. Taken RET instruction pops the return address `raddr` from the stack (it's the instruction following the previous CALL), then pops a return value `retval` from the stack and sets `C = A XOR retval`. Finally, the instruction jumps back to `raddr`.

src/AssemblyGeneratorX86.cpp

@@ -55,7 +55,7 @@ namespace RandomX {
 	}
 
 	void AssemblyGeneratorX86::gena(Instruction& instr) {
-		asmCode << "\txor " << regR[instr.rega % RegistersCount] << ", 0" << std::hex << instr.addr0 << "h" << std::dec << std::endl;
+		asmCode << "\txor " << regR[instr.rega % RegistersCount] << ", 0" << std::hex << instr.addra << "h" << std::dec << std::endl;
 		switch (instr.loca & 7)
 		{
 		case 0:
@@ -93,7 +93,7 @@ namespace RandomX {
 			asmCode << "\t" << instrx86 << " rax, cl" << std::endl;
 			return;
 		default:
-			asmCode << "\t" << instrx86 << " rax, " << (instr.imm0 & 63) << std::endl;;
+			asmCode << "\t" << instrx86 << " rax, " << (instr.imm8 & 63) << std::endl;;
 			return;
 		}
 	}
@@ -110,7 +110,7 @@ namespace RandomX {
 			asmCode << regR[instr.regb % RegistersCount] << std::endl;
 			return;
 		default:
-			asmCode  << instr.imm1 << std::endl;;
+			asmCode  << instr.imm32 << std::endl;;
 			return;
 		}
 	}
@@ -127,7 +127,7 @@ namespace RandomX {
 			asmCode << regR32[instr.regb % RegistersCount] << std::endl;
 			return;
 		default:
-			asmCode << instr.imm1 << std::endl;;
+			asmCode << instr.imm32 << std::endl;;
 			return;
 		}
 	}
@@ -147,7 +147,7 @@ namespace RandomX {
 			return;
 		default:
 			convertible_t bimm;
-			bimm.f64 = (double)instr.imm1;
+			bimm.f64 = (double)instr.imm32;
 			asmCode << "\tmov rax, " << bimm.i64 << std::endl;
 			asmCode << "\tmovd xmm1, rax" << std::endl;
 			asmCode << "\t" << instrx86 << " xmm0, xmm1" << std::endl;
@@ -161,7 +161,7 @@ namespace RandomX {
 		case 0:
 			asmCode << "\tmov rcx, rax" << std::endl;
 			asmCode << "\tmov eax, " << regR32[instr.regc % RegistersCount] << std::endl;
-			asmCode << "\txor eax, 0" << std::hex << instr.addr1 << "h" << std::dec << std::endl;
+			asmCode << "\txor eax, 0" << std::hex << instr.addrc << "h" << std::dec << std::endl;
 			asmCode << "\tand eax, " << (ScratchpadL2 - 1) << std::endl;
 			asmCode << "\tmov qword ptr [rsi + rax * 8], rcx" << std::endl;
 			if (trace) {
@@ -174,7 +174,7 @@ namespace RandomX {
 		case 3:
 			asmCode << "\tmov rcx, rax" << std::endl;
 			asmCode << "\tmov eax, " << regR32[instr.regc % RegistersCount] << std::endl;
-			asmCode << "\txor eax, 0" << std::hex << instr.addr1 << "h" << std::dec << std::endl;
+			asmCode << "\txor eax, 0" << std::hex << instr.addrc << "h" << std::dec << std::endl;
 			asmCode << "\tand eax, " << (ScratchpadL1 - 1) << std::endl;
 			asmCode << "\tmov qword ptr [rsi + rax * 8], rcx" << std::endl;
 			if (trace) {
@@ -195,7 +195,7 @@ namespace RandomX {
 		{
 		case 0:
 			asmCode << "\tmov eax, " << regR32[instr.regc % RegistersCount] << std::endl;
-			asmCode << "\txor eax, 0" << std::hex << instr.addr1 << "h" << std::dec << std::endl;
+			asmCode << "\txor eax, 0" << std::hex << instr.addrc << "h" << std::dec << std::endl;
 			asmCode << "\tand eax, " << (ScratchpadL2 - 1) << std::endl;
 			asmCode << "\tmovd qword ptr [rsi + rax * 8], xmm0" << std::endl;
 			break;
@@ -204,7 +204,7 @@ namespace RandomX {
 		case 2:
 		case 3:
 			asmCode << "\tmov eax, " << regR32[instr.regc % RegistersCount] << std::endl;
-			asmCode << "\txor eax, 0" << std::hex << instr.addr1 << "h" << std::dec << std::endl;
+			asmCode << "\txor eax, 0" << std::hex << instr.addrc << "h" << std::dec << std::endl;
 			asmCode << "\tand eax, " << (ScratchpadL1 - 1) << std::endl;
 			asmCode << "\tmovd qword ptr [rsi + rax * 8], xmm0" << std::endl;
 			break;
@@ -278,7 +278,7 @@ namespace RandomX {
 		gena(instr);
 		asmCode << "\tmovsxd rcx, eax" << std::endl;
 		if ((instr.locb & 7) >= 6) {
-			asmCode << "\tmov rax, " << instr.imm1 << std::endl;
+			asmCode << "\tmov rax, " << instr.imm32 << std::endl;
 		}
 		else {
 			asmCode << "\tmovsxd rax, " << regR32[instr.regb % RegistersCount] << std::endl;
@@ -299,11 +299,11 @@ namespace RandomX {
 	void AssemblyGeneratorX86::h_DIV_64(Instruction& instr, int i) {
 		gena(instr);
 		if ((instr.locb & 7) >= 6) {
-			if (instr.imm1 == 0) {
+			if (instr.imm32 == 0) {
 				asmCode << "\tmov ecx, 1" << std::endl;
 			}
 			else {
-				asmCode << "\tmov ecx, " << instr.imm1 << std::endl;
+				asmCode << "\tmov ecx, " << instr.imm32 << std::endl;
 			}
 		}
 		else {
@@ -461,7 +461,7 @@ namespace RandomX {
 	void AssemblyGeneratorX86::h_CALL(Instruction& instr, int i) {
 		gena(instr);
 		if ((instr.locb & 7) < 6) {
-			asmCode << "\tcmp " << regR32[instr.regb % RegistersCount] << ", " << instr.imm1 << std::endl;
+			asmCode << "\tcmp " << regR32[instr.regb % RegistersCount] << ", " << instr.imm32 << std::endl;
 			asmCode << "\tjbe short taken_call_" << i << std::endl;
 			gencr(instr);
 			asmCode << "\tjmp rx_i_" << wrapInstr(i + 1) << std::endl;
@@ -471,7 +471,7 @@ namespace RandomX {
 			asmCode << "\tmov qword ptr [rsi + rdi * 8 + 262144], rax" << std::endl;
 		}
 		asmCode << "\tpush rax" << std::endl;
-		asmCode << "\tcall rx_i_" << wrapInstr(i + (instr.imm0 & 127) + 2) << std::endl;
+		asmCode << "\tcall rx_i_" << wrapInstr(i + (instr.imm8 & 127) + 2) << std::endl;
 	}
 
 	void AssemblyGeneratorX86::h_RET(Instruction& instr, int i) {
@@ -479,7 +479,7 @@ namespace RandomX {
 		asmCode << "\tcmp rsp, rbp" << std::endl;
 		asmCode << "\tje short not_taken_ret_" << i << std::endl;
 		if ((instr.locb & 7) < 6) {
-			asmCode << "\tcmp " << regR32[instr.regb % RegistersCount] << ", " << instr.imm1 << std::endl;
+			asmCode << "\tcmp " << regR32[instr.regb % RegistersCount] << ", " << instr.imm32 << std::endl;
 			asmCode << "\tja short not_taken_ret_" << i << std::endl;
 		}
 		asmCode << "\txor rax, qword ptr [rsp + 8]" << std::endl;

src/Instruction.cpp

@@ -25,10 +25,10 @@ namespace RandomX {
 			os << "  A: loc = " << std::dec << (loca & 7) << ", reg: " << (rega & 7) << std::endl;
 			os << "  B: loc = " << (locb & 7) << ", reg: " << (regb & 7) << std::endl;
 			os << "  C: loc = " << (locc & 7) << ", reg: " << (regc & 7) << std::endl;
-			os << "  addr0 = " << std::hex << addr0 << std::endl;
-			os << "  addr1 = " << addr1 << std::endl;
-			os << "  imm0 = " << std::dec << (int)imm0 << std::endl;
-			os << "  imm1 = " << imm1 << std::endl;
+			os << "  addra = " << std::hex << addra << std::endl;
+			os << "  addrc = " << addrc << std::endl;
+			os << "  imm8 = " << std::dec << (int)imm8 << std::endl;
+			os << "  imm32 = " << imm32 << std::endl;
 		}
 
 #include "instructionWeights.hpp"

src/Instruction.hpp

@@ -33,11 +33,11 @@ namespace RandomX {
 		uint8_t regb;
 		uint8_t locc;
 		uint8_t regc;
-		uint8_t imm0;
-		int32_t addr0;
+		uint8_t imm8;
+		int32_t addra;
 		union {
-			uint32_t addr1;
-			int32_t imm1;
+			uint32_t addrc;
+			int32_t imm32;
 		};
 		const char* getName() const {
 			return names[opcode];

src/InterpretedVirtualMachine.cpp

@@ -65,7 +65,7 @@ namespace RandomX {
 
 	convertible_t InterpretedVirtualMachine::loada(Instruction& inst) {
 		convertible_t& rega = reg.r[inst.rega % RegistersCount];
-		rega.i64 ^= inst.addr0; //sign-extend addr0
+		rega.i64 ^= inst.addra; //sign-extend addra
 		addr_t addr = rega.u32;
 		switch (inst.loca & 7)
 		{
@@ -98,7 +98,7 @@ namespace RandomX {
 		case 6:
 		case 7:
 			convertible_t temp;
-			temp.i64 = inst.imm1; //sign-extend imm1
+			temp.i64 = inst.imm32; //sign-extend imm32
 			return temp;
 		}
 	}
@@ -116,7 +116,7 @@ namespace RandomX {
 		case 6:
 		case 7:
 			convertible_t temp;
-			temp.u64 = inst.imm0;
+			temp.u64 = inst.imm8;
 			return temp;
 		}
 	}
@@ -133,7 +133,7 @@ namespace RandomX {
 			return reg.f[inst.regb % RegistersCount].f64;
 		case 6:
 		case 7:
-			return (double)inst.imm1;
+			return (double)inst.imm32;
 		}
 	}
 
@@ -142,13 +142,13 @@ namespace RandomX {
 		switch (inst.locc & 7)
 		{
 		case 0:
-			addr = reg.r[inst.regc % RegistersCount].u32 ^ inst.addr1;
+			addr = reg.r[inst.regc % RegistersCount].u32 ^ inst.addrc;
 			return scratchpad[addr % ScratchpadL2];
 
 		case 1:
 		case 2:
 		case 3:
-			addr = reg.r[inst.regc % RegistersCount].u32 ^ inst.addr1;
+			addr = reg.r[inst.regc % RegistersCount].u32 ^ inst.addrc;
 			return scratchpad[addr % ScratchpadL1];
 
 		case 4:
@@ -164,13 +164,13 @@ namespace RandomX {
 		switch (inst.locc & 7)
 		{
 		case 0:
-			addr = reg.r[inst.regc % RegistersCount].u32 ^ inst.addr1;
+			addr = reg.r[inst.regc % RegistersCount].u32 ^ inst.addrc;
 			return scratchpad[addr % ScratchpadL2];
 
 		case 1:
 		case 2:
 		case 3:
-			addr = reg.r[inst.regc % RegistersCount].u32 ^ inst.addr1;
+			addr = reg.r[inst.regc % RegistersCount].u32 ^ inst.addrc;
 			return scratchpad[addr % ScratchpadL1];
 
 		case 4:
@@ -272,10 +272,10 @@ namespace RandomX {
 		convertible_t a = loada(inst);
 		convertible_t b = loadbr1(inst);
 		convertible_t& c = getcr(inst);
-		if (b.u32 <= (uint32_t)inst.imm1) {
+		if (b.u32 <= (uint32_t)inst.imm32) {
 			stackPush(a);
 			stackPush(pc);
-			pc += (inst.imm0 & 127) + 1;
+			pc += (inst.imm8 & 127) + 1;
 			pc = pc % ProgramLength;
 			if (trace) std::cout << std::hex << a.u64 << std::endl;
 		}
@@ -289,7 +289,7 @@ namespace RandomX {
 		convertible_t a = loada(inst);
 		convertible_t b = loadbr1(inst);
 		convertible_t& c = getcr(inst);
-		if (stack.size() > 0 && b.u32 <= (uint32_t)inst.imm1) {
+		if (stack.size() > 0 && b.u32 <= (uint32_t)inst.imm32) {
 			auto raddr = stackPopAddress();
 			auto retval = stackPopValue();
 			c.u64 = a.u64 ^ retval.u64;

src/JitCompilerX86.cpp

@@ -259,7 +259,7 @@ namespace RandomX {
 	void JitCompilerX86::gena(Instruction& instr) {
 		emit(uint16_t(0x8149)); //xor
 		emitByte(0xf0 + (instr.rega % RegistersCount));
-		emit(instr.addr0);
+		emit(instr.addra);
 		int32_t pc;
 		switch (instr.loca & 7)
 		{
@@ -301,7 +301,7 @@ namespace RandomX {
 		else {
 			emitByte(0x48); //REX.W
 			emit(opcodeImm); //xxx rax, imm8
-			emitByte((instr.imm0 & 63));
+			emitByte((instr.imm8 & 63));
 		}
 	}
 
@@ -312,7 +312,7 @@ namespace RandomX {
 		}
 		else {
 			emit(opcodeImm); // xxx rax, imm32
-			emit(instr.imm1);
+			emit(instr.imm32);
 		}
 	}
 
@@ -323,7 +323,7 @@ namespace RandomX {
 		}
 		else {
 			emitByte(opcodeImm); // xxx eax, imm32
-			emit(instr.imm1);
+			emit(instr.imm32);
 		}
 	}
 
@@ -343,7 +343,7 @@ namespace RandomX {
 		}
 		else {
 			convertible_t bimm;
-			bimm.f64 = (double)instr.imm1;
+			bimm.f64 = (double)instr.imm32;
 			emit(uint16_t(0xb848)); //movabs rax,imm64
 			emit(bimm.i64);
 			emitByte(0x66); //movq xmm1,rax
@@ -362,7 +362,7 @@ namespace RandomX {
 			emitByte(0x8b); // mov
 			emitByte(0xc0 + (instr.regc % RegistersCount)); //eax, regc
 			emitByte(0x35); // xor eax
-			emit(instr.addr1);
+			emit(instr.addrc);
 			emitByte(0x25); //and
 			emit(ScratchpadL2 - 1); //whole scratchpad
 			emit(0xc60c8948); // mov    QWORD PTR [rsi+rax*8],rcx
@@ -375,7 +375,7 @@ namespace RandomX {
 			emitByte(0x8b); // mov
 			emitByte(0xc0 + (instr.regc % RegistersCount)); //eax, regc
 			emitByte(0x35); // xor eax
-			emit(instr.addr1);
+			emit(instr.addrc);
 			emitByte(0x25); //and
 			emit(ScratchpadL1 - 1); //first 16 KiB of scratchpad
 			emit(0xc60c8948); // mov    QWORD PTR [rsi+rax*8],rcx
@@ -396,7 +396,7 @@ namespace RandomX {
 			emit(uint16_t(0x8b41)); //mov
 			emitByte(0xc0 + regc); //eax, regc
 			emitByte(0x35); // xor eax
-			emit(instr.addr1);
+			emit(instr.addrc);
 			emitByte(0x25); //and
 			emit(ScratchpadL2 - 1); //whole scratchpad
 			emit(uint16_t(0x4866)); //prefix
@@ -409,7 +409,7 @@ namespace RandomX {
 			emit(uint16_t(0x8b41)); //mov
 			emitByte(0xc0 + regc); //eax, regc
 			emitByte(0x35); // xor eax
-			emit(instr.addr1);
+			emit(instr.addrc);
 			emitByte(0x25); //and
 			emit(ScratchpadL1 - 1); //first 16 KiB of scratchpad
 			emit(uint16_t(0x4866)); //prefix
@@ -456,7 +456,7 @@ namespace RandomX {
 		else {
 			emitByte(0x48); //REX
 			emit(uint16_t(0xc069)); // imul rax, rax, imm32
-			emit(instr.imm1);
+			emit(instr.imm32);
 		}
 		gencr(instr);
 	}
@@ -469,7 +469,7 @@ namespace RandomX {
 		else {
 			emitByte(0x48);
 			emit(uint16_t(0xc1c7)); // mov rcx, imm32
-			emit(instr.imm1);
+			emit(instr.imm32);
 		}
 		emitByte(0x48);
 		emit(uint16_t(0xe1f7)); // mul rcx
@@ -486,7 +486,7 @@ namespace RandomX {
 		}
 		else {
 			emitByte(0xb8); // mov eax, imm32
-			emit(instr.imm1);
+			emit(instr.imm32);
 		}
 		emit(0xc1af0f48); //imul rax,rcx
 		gencr(instr);
@@ -502,7 +502,7 @@ namespace RandomX {
 		else {
 			emitByte(0x48);
 			emit(uint16_t(0xc0c7)); // mov rax, imm32
-			emit(instr.imm1);
+			emit(instr.imm32);
 		}
 		emit(0xc1af0f48); //imul rax,rcx
 		gencr(instr);
@@ -516,7 +516,7 @@ namespace RandomX {
 		else {
 			emitByte(0x48);
 			emit(uint16_t(0xc1c7)); // mov rcx, imm32
-			emit(instr.imm1);
+			emit(instr.imm32);
 		}
 		emitByte(0x48);
 		emit(uint16_t(0xe9f7)); // imul rcx
@@ -536,7 +536,7 @@ namespace RandomX {
 		}
 		else {
 			emitByte(0xb9); //mov ecx, imm32
-			emit(instr.imm1 != 0 ? instr.imm1 : 1);
+			emit(instr.imm32 != 0 ? instr.imm32 : 1);
 		}
 		emit(0xf748d233); //xor edx,edx; div rcx
 		emitByte(0xf1);
@@ -550,7 +550,7 @@ namespace RandomX {
 		}
 		else {
 			emitByte(0xba); // xxx edx, imm32
-			emit(instr.imm1);
+			emit(instr.imm32);
 		}
 		emit(0xc88b480b75fffa83);
 		emit(0x1274c9ff48c1d148);
@@ -661,7 +661,7 @@ namespace RandomX {
 		if ((instr.locb & 7) <= 5) {
 			emit(uint16_t(0x8141)); //cmp regb, imm32
 			emitByte(0xf8 + (instr.regb % RegistersCount));
-			emit(instr.imm1);
+			emit(instr.imm32);
 			if ((instr.locc & 7) <= 3) {
 				emit(uint16_t(0x1676)); //jmp
 			}
@@ -673,7 +673,7 @@ namespace RandomX {
 		}
 		emitByte(0x50); //push rax
 		emitByte(0xe8); //call
-		i = wrapInstr(i + (instr.imm0 & 127) + 2);
+		i = wrapInstr(i + (instr.imm8 & 127) + 2);
 		if (i < instructionOffsets.size()) {
 			emit(instructionOffsets[i] - (codePos + 4));
 		}
@@ -697,7 +697,7 @@ namespace RandomX {
 		if ((instr.locb & 7) <= 5) {
 			emit(uint16_t(0x8141)); //cmp regb, imm32
 			emitByte(0xf8 + (instr.regb % RegistersCount));
-			emit(instr.imm1);
+			emit(instr.imm32);
 			emitByte(0x77); //jmp
 			emitByte(11 + crlen);
 		}